Belkin G Wireless router User Manual page 39

altErnatE sEtup MEthoD
sections
table of contents
1. user name
This space is provided to type in your user name that was assigned by
your isP�
2. password
Type in your password and re-type it into the "retype Password" box to
confirm it�
3. service name (optional)
A service name is rarely required by an isP� if you are not sure if your isP
requires a service name, leave this blank�
4. My internet ip
1) Get Dynamically From isP: Getting WAN iP address from
isP automatically�
2) Use static iP address: Need to enter isP information below fields
(My iP Address)�
g Wireless router
1 2 3 4 5 6
5. My ip address
Provided by your isP� enter the iP address here� (Only available when
user selects "Use static iP address" from iP Address Assignment above�)
6. Mtu
The MTU setting should never be changed unless your isP gives you
a specific MTU setting� Making changes to the MTU setting can cause
problems with your internet connection including disconnection from the
internet, slow internet access, and problems with internet applications
working properly�
7. Disconnect after X minutes...
This feature is used to automatically disconnect the router from your
isP when there is no activity for a specified period of time� For instance,
placing a check mark next to this option and entering "5" into the minute
field will cause the router to disconnect from the internet after five
minutes of no internet activity� This option should be used if you pay for
your internet service by the minute�
37
7 8 9 10