Configuring Your Router - ActionTec V1000H Setup And User Manual

Actiontec V1000H Router
Setup and User Guide

Configuring Your Router

To configure your router, you will need the Customer Information Sheet that was emailed to you (or deliv-
ered to you by your Account Representative). This sheet contains your Static IP assignments. If you do not
have this, please contact our Technical Support team before going any further.
To configure your router:
1. Open an Internet browser (Internet Explorer, Firefox, Safari, etc.) and in the address field, enter
"192.168.0.1," and press Enter.
2. On the Main Menu, Click Advanced Setup.
3. From the left navigation bar, Click WAN IP Addressing.
4. Click the Specify a Static IP Address radial button.
5. Enter your WAN IP , Subnet Mask and WAN Default Gateway IP addresses in section 3. This information
can be found on your Customer Information Sheet.
6. Check the Gateway DNS box.
1-888-850-5915
5
Technical Support
103950/3-11/6960