Discharge Chute - Ariens 920014 COMPACT 24 LE Owner's/Operator's Manual

MANUAL DISCHARGE CHUTE
DEFLECTOR (920013)
(Figure 24)
Deflector must stay in selected position while
throwing snow.
To adjust, loosen then retighten the wing
knob to desired tension.
1
1. Wing Knob
2. Discharge Chute Deflector

3. Discharge Chute

REMOTE DISCHARGE
DEFLECTOR CONTROL
ADJUSTMENT (920014)
(Figure 25 and 26)
Deflector must stay in selected position while
throwing snow.
If deflector does not stay in set position:
1. Tighten nut beneath control panel to
increase pressure on deflector control
(Figure 25).
.
Adjustment Nut
Figure 25
2
3
Figure 24
If deflector does not follow full range of travel:
1. Push deflector remote all the way
forward.
2. Loosen adjusting nuts on remote
deflector cable attached to the chute
deflector (Figure 26).
3. To adjust the deflector lower:
Loosen bottom adjustment nut and
tighten top adjustment nut.
To adjust deflector higher:
Loosen top adjustment nut and tighten
bottom adjustment nut.
4. Check the deflectors range of travel and
repeat adjustment as necessary.
OS8215
1
1. Adjusting Nuts
2. Cable Support Bracket
3. Remote Deflector Control Cable
DISCHARGE CHUTE
(Figure 27)
If discharge chute does not stay in position
while operating, tighten nut on carriage bolt at
pivot point to increase tension on spring.
1
2
OS8220
OS8066
GB - 26
3
2
Figure 26
1. Spring
2. Nut
Figure 27
OS8217