Using The Machine Setting Mode Key - Brother 882-W07 Operational Manual

Using the Machine Setting Mode Key

Press to change the default machine settings (needle stop position, embroidery speed, opening
display, etc.). To display the different settings screens, press
"General settings" or
Memo
• Press or
Sewing settings
* Refer to Operation Manual Addendum, for the detailed instruction of the multi-function foot controller setting.
a Select whether to use the sewing speed controller to determine the zigzag width (see page 115).
b Make adjustments to character or decorative stitch patterns (see page 162).
c Adjust the presser foot height. (Select the height of the presser foot when the presser foot is raised.)
d Adjust the presser foot pressure. (The higher the number, the greater the pressure will be. Set the pressure at "3" for
normal sewing.)
e Select whether "1-01 Straight stitch (Left)" or "1-03 Straight stitch (Middle)" is the utility stitch that is automatically
selected when the machine is turned on.
f Change the height of the presser foot when sewing is stopped when the pivot setting is selected (see page 84).
Adjust the presser foot to one of the three heights (3.2 mm, 5.0 mm and 7.5 mm).
g Change the height of the presser foot when the machine is set to free motion sewing mode (see page 116).
h When set to "ON", the thickness of the fabric is automatically detected by an internal sensor while sewing. This
enables the fabric to be fed smoothly (see pages 76 and 85).
i Press to save a settings screen image to USB media (see page 39).
for "Embroidery settings".
to display a different settings screen.
a
b
c
d
e
i
LCD SCREEN
for "Sewing settings",
1
for
f
g
h
i
35