Fujitsu fi-4860C Installation Manual page 32

Counter
Batch counter
Abrasion counter
Life counter
ATTENTION
1-10
1.3 Operator Panel
(Left) button The number of scanned documents from the start of
reading until "Paper empty" or an error is detected.
is pressed for at
The counter is automatically reset at the start of
least one second.
next reading. This counter can be used for checking
the number of scanned documents per batch.
(Right)button This counter is increased by one per sheet. The
counter is not re-initialized until the power is turned
is pressed for at
off. The counter can be used for checking the
least one second.
number of scanned documents per day.
The abrasion counter counts the accumulated number of scanned sheets.
This counter is increased by one per sheet scanned.
It is used for checking the cleaning cycle or the parts replacement cycle.
Refer to "Chapter7 OPERATOR PANEL MENUS of the Opelator's
Guide" included in "User Manual CD-ROM" about how to reset this
counter.
Keeps a cumulative count of the total number of scans made by the
scanner. This counter is increased by one per sheet and may be used to
estimate of the device's remaining life. This counter cannot be reset.
The counter is not displayed when the value is 0.
Functions