Basic Tv Operation - Mitsubishi Electric Unisen LT-52151 Owner's Manual

14
1. Basic Setup and Operation

Basic TV Operation

Watching Broadcast TV
TV Connected to an Antenna, Direct Cable Service,
Cable Box, Set-Top Box, or Satellite Receiver
1.
ACTIVITY.
Press
2.
Press and to select a broadcast source. If
you named devices during Auto Input Sensing,
select an input from the Watch TV group. Note:
Your TV may have only one group (Watch TV).
Note: For more about the Activity menu, see page 25.
Activity menu, antenna input selected
3.
ENTER to switch to the input.
Press
4.
Tune to a channel on the ANT input using any of
these methods.
• Enter the channel number using the number
keys on the remote control and press ENTER.
For a two-part digital channel, such as 3-1,
—
press 3 CANCEL 1 to enter a dash (separator).
• Press CHANNEL UP/CHANNEL DN (+, –) to change
channels one channel at a time.
• Press (LAST) to switch back to the previ-
ously tuned channel.
• Antenna or Direct Cable Only.
display ChannelView channel listings, highlight
a channel number, and press ENTER to tune.
Watching DVDs or Videos
TV Connected to a DVD Player, DVR, or VCR
1.
2.
Activity menu, DVD input selected
3.
Press GUIDE to
Press ACTIVITY.
Press and to select a movie source. If you
named devices during Auto Input Sensing, select
an input from the Watch Movie group.
Press ENTER to switch to the input.