International Symbols - Echo SRM-211 Operator's Manual

Hide thumbs Also See for SRM-211:

Operator's manual (43 pages)

Installation and operating instructions manual (13 pages)

Table Of Contents

Table of Contents

Shaft Decal

WARNING

• This unit can be dangerous and cause serious injury if improperly

used. To reduce injury risk to operator, helpers and bystanders, read

and understand the Operator's and Safety manuals.

• Blindness can occur from objects that are thrown or ricocheted even

with shield in place. Operators, helpers and bystanders must wear

ANSI Z87.1 approved eye protection.

• Always wear hearing protection when operating unit.

• Prevent accidental contact with unit and any cutting attachment.

Maintain a 50 ft. (15M) radius, DANGER ZONE surrounding the

operator. ONLY the operator, dressed in proper protective clothing

should be in the DANGER ZONE.

• Beware of KICKOUT (blade thrust) when using blades. Special

precautions are necessary for blade operation, see your Operator's

and Safety Manuals. ONLY install ECHO approved blades on Brush

Cutters (SRM) models equipped with proper blade shield, U-handles,

harness, blade collar, nut and cotter pin.

• Blade/Cutting attachment does not stop immediately after releasing

throttle. Keep hands and feet clear of blade/cutting attachment unless

engine is shut off and cutting attachment is not moving.

• INSPECT BLADES BEFORE USE.

• DO NOT USE DAMAGED, CRACKED, BENT, DULL OR

IMPROPERLY SHARPENED BLADES.

• Do not remove shields, modify the unit or install attachments or parts

not approved by ECHO. Approved attachment information and

replacement Operator's and Safety Manuals are available from your

ECHO dealer or by writing: ECHO, INCORPORATED,

400 OAKWOOD RD., LAKE ZURICH, IL 60047.