Toshiba Portege R200 User Manual page 49

Fingerprint Sensor
LCD screen
LCD Sensor switch
Do not put a magnetic object close to the switch. The computer will
automatically enter Hibernation mode and shut down even if the Panel
Power Off features is disabled.
User's Manual
Just by swiping the finger against the fingerprint
sensor, the following functions will be enabled:
■
Logon to Windows and access a security-
enabled homepage through IE (Internet
Explorer).
■
Files and folders can be encrypted/decrypted
and third party access to them prevented.
■
Disable the password-protected screen-saver
when returning from power-saving (standby)
mode.
■
System boot authentication and Single Touch
Boot feature.
■
Authentication of the User Password and Hard
Disk Drive Password when booting up the
computer.
The LCD screen displays high-contrast text and
graphics. The computer's XGA screen consists
of 1024 × 768 pixels. Refer to
and Modes in Appendix B.
When the computer operates on the AC adaptor
the LCD screen's image will be somewhat
brighter than when it operates on battery power.
The lower brightness level is intended to save
battery power.
This switch senses when the computer's LCD
display panel is closed or opened and activates
the Panel Power Off/On feature. When you close
the LCD display panel the computer enters
Hibernation mode and shuts down. When you
open the computer's LCD display panel the
computer starts in Hibernation mode. Use the
TOSHIBA Power Saver Utility to enable or
disable this feature. The default is "enabled".
Refer to the TOSHIBA Power Saver Utility and
Panel Power Off/On items in Chapter 1,
features, for details on settings.
The Grand Tour
Display Controller
Special
2-9