Toshiba Portege R200 User Manual page 133

HDD −> FDD −> CD-
ROM −> LAN
CD-ROM −> LAN −>
HDD −> FDD
CD-ROM −> LAN −>
FDD −> HDD
You can override the settings and manually select a boot device by
pressing one of the following keys while the computer is booting:
* Floppy disk drive is looked for when the boot disk is contained in external
1
floppy disk drive. When SD memory card is set as the boot disk, external
floppy disk drive is looked for first. Next, SD memory card is looked for.
* CD-ROM is looked for when the boot disc is contained in external optical
2
media drive.
To change the boot drive, follow the steps below.
1. Hold down F12 and boot the computer.
2. The following menu will be displayed with the following icons: Built-in
HDD, CD-ROM, floppy disk drive (or SD memory card), Network (LAN),
USB Memory boot.
A bar will appear only under the selected device.
User's Manual
The computer looks for bootable files in the
following order: HDD, floppy disk drive*
ROM*
The computer looks for bootable files in the
following order: CD-ROM*
disk drive*
The computer looks for bootable files in the
following order: CD-ROM*
drive*
U Selects the USB floppy disk drive.
N Selects the Network.
1 Selects the primary HDD.
C Selects the CD-ROM*
M Selects the USB Memory.
and LAN (Default).
2
.
1
and HDD.
1
.
2
HW Setup
, CD-
1
, LAN, HDD, floppy
2
, LAN, floppy disk
2
7-3