Removing A Pc Card; Sd Card - Toshiba Portege R200 User Manual

Removing a PC card

To remove the PC card, follow the steps below.
1. Open the Safely Remove Hardware icon on the Task Bar.
2. Point to PC card and click.
3. Press the PC card eject button to extend it.
If the PC card is not inserted all the way, the eject button may not pop out.
Be sure to push the PC card firmly and press the eject button again.
4. Press the extended eject button to pop the card out slightly.
5. Grasp the PC card and draw it out.
PC card
eject button

SD card

The computer is equipped with an SD card slot that can accommodate
Secure Digital flash memory cards with various memory capacities. SD
cards let you easily transfer data from devices, such as digital cameras and
Personal Digital Assistants, that use SD card flash-memory. The cards
have a high level of security and copy protection features. The slot cannot
accommodate Multi Media cards.
Keep foreign objects out of the SD card slot. Never allow metal objects,
such as screws, staples and paper clips, to enter the PC or keyboard.
Foreign metal objects can create a short circuit, which can cause PC
damage and fire, possibly resulting in serious injury.
SD memory cards comply with SDMI (Secure Digital Music Initiative),
which is a technology adopted to prevent unlawful copy or playback of
digital music. For this reason, you cannot copy or playback protected
material on another computer or other device. You may not use the
reproduction of any copyrighted material except for your personal
enjoyment.
User's Manual
Figure 8-2 Removing the PC card
Optional Devices
PC card
8-3