Parts Inventory; Installing An Internal Rdx Drive Dock - IBM RDX User Manual

Parts inventory

Before you install the RDX drive, make sure that you received the following parts:
v Internal RDX drive:
v External RDX drive:

Installing an internal RDX drive dock

Use the following instructions to install an internal RDX drive dock. The drive
dock is ready to install in a standard 5.25-inch half-high bay.
Note: Keep the packaging that comes with the RDX drive in case you have to
Figure 6. Finding the connectors on an internal RDX drive dock
To install the internal RDX drive dock, complete the following steps:
8
RDX USB Drive User's Guide
– Internal drive dock
– Media cartridge
– 4 internal USB cables (you must select the applicable cable for your server)
– 4 mounting screws
– IBM Documentation CD
– RDX utility CD
– External drive dock
– Media cartridge
– External USB cable
– Power adaptor
– IBM Documentation CD
– RDX utility CD
return it for service or warranty replacement.
Mounting
holes
Screws
1. Unpack the drive.
2. Turn off the server.
3. Open the server cover, using a screwdriver if necessary.
Screws
Mounting
holes
USB
cable
Power
cable