Camera Block Menu - Night Owl Advantage Series Manual

Chapter 15: Advanced Menu

15.1.3 Camera Block Menu

The Camera Block Menu allows you to configure the settings on your DVR
for when the camera is covered.
To access the Camera Block Menu, select the Advanced button, select
Alarm from the list on the left side of the screen, and then select Camera
Block.

CH: Indicates the channel that you will be configuring.

Enable: Allows you to activate the alarm that indicates that the
camera is blocked or covered.

Sensitivity: Indicates the level of sensitivity of the camera. The
lower the sensitivity, the more motion will be needed to start
recording.

Schedule: Select Settings to open a new window that will show
when the DVR is set to record alarms. (Refer to Chapter 15.1.1.2.)

Trigger: Select Settings to open a new window that will allow you
to generate different responses by the DVR when alarms have
been detected. (Refer to Chapter 15.1.1.3.)

Copy CH: Allows you to configure the settings for one day and
copy them to another day.

To CH: Allows you to choose the day that you would like to copy
the configured settings to.
49