Technical Specifications - D-Link DES-3226S Technical Specifications

DES-3226S

Technical Specifications

General
Protocol
CSMA/CD
Data Transfer Rates
- Ethernet:
10Mbps (half duplex)
20Mbps (full duplex)
- Fast Ethernet:
100Mbps (half duplex)
200Mbps (full duplex)
- Gigabit Ethernet:
2000Mbps (full duplex)
Topology
Star
Hardware
Basic Configuration
- 24 auto-sensing 10/100Mbps ports (built-in)
- 1 open slot
Switch Fabric
8.8 Gbps
LED (per device)
- Power
- Console
Built-in Ports Supported Functions
- IEEE 802.3 10BASE-T/802.3u 100BASE-TX standards
- Full/half duplex support with ANSI/IEEE 802.3 NWay auto-negotiation
- IEEE 802.3x Flow Control in full-duplex, back pressure in half-duplex
- MDI-II/MDI-X auto-sensing for all twisted-pair ports
- Auto-correction of twisted-pair Rx reverse polarity
- Port trunking: up to 8 ports per trunk, up to 8 trunks per switch
- 10BASE-T cables:
UTP Cat. 3, 4, 5 (100 m max.)
- 100BASE-TX cables:
UTP Cat. 5 (100 m max.)
- LED report (per port):
10/100Mbps speed
Link/Act
Optional Modules
DES-332GS Stack + GBIC Module
- 1 stacking port
- 1 GBIC port (IEEE 802.3z standard)
- Stackable units: 6 DES-3226S switches per stack
- Stacking method: ring
- Full duplex support for GBIC port
- IEEE 802.3x Flow Control (GBIC port)
- Stacking cable: proprietary IEEE 1394 cable (provided)
- Network cables (GBIC port): single-mode and multi-mode fiber
- LED report (per port): Link/Act (GBIC port)
DES-132F Fast Ethernet Fiber Module
- IEEE 802.3u 100BASE-FX standard
- 2 100Mbps fiber ports (SC connectors)
- Full duplex support
- IEEE 802.3x Flow Control
- Cables: 50, 62.5/125-micron multi-mode fiber (2 km max.)
- LED report (per port): Link/Act
DES-132FL Fast Ethernet Fiber Module
- IEEE 802.3u 100BASE-FX standard
- 2 100Mbps fiber ports (SC connectors)
- Full duplex support
- IEEE 802.3x Flow Control
- Cables: 9-micron single-mode fiber (15 km max.)
- LED report (per port): Link/Act
DES-132G Gigabit Fiber Module
- IEEE 802.3z 1000BASE-SX standard
- 2 Gigabit fiber ports (SC connectors)
- Full duplex support
- IEEE 802.3x Flow Control
- Cables: 50/125 micron multi-mode fiber (525 m max.), 62.5/125 micron
multi-mode fiber (275 m max.)
- LED report (per port): Link/Act
10/100Mbps L2 Stackable Switch
DES-132GL Gigabit Fiber Module
- IEEE 802.3z 1000BASE-LX standard
- 2 Gigabit fiber ports (SC connectors)
- Full duplex support
- IEEE 802.3x Flow Control
- Cables: single-mode fiber (5 km max.)
- LED report (per port): Link/Act
DES-132T Gigabit Copper Module
- IEEE 802.3 10BASE-T/802.3u 100BASE-TX/IEEE 802.3ab 1000BASE-T
standards
- 2 auto-sensing 10/100/1000Mbps ports
- Full/half duplex support with ANSI/IEEE 802.3 NWay auto-negotiation
- IEEE 802.3x Flow Control in full-duplex, back pressure in half-duplex
- 10BASE-T/100BASE-TX: full/half duplex
- 1000BASE-T: full duplex
- MDI-II/MDI-X auto-sensing for all twisted-pair ports
- Auto-correction of twisted-pair Rx reverse polarity
- 10BASE-T cables:
UTP Cat. 3, 4, 5 (100 m max.)
- 100BASE-TX/1000BASE-T cables:
UTP Cat. 5/Cat. 5e (100 m max.)
- LED report (per port):
100/1000Mbps speed
Link/Act
DES-132GB GBIC Module
- IEEE 802.3z standard
- 2 GBIC-based ports for installation of 1000BASE-SX and 1000BASE-LX
PHY modules
- Full duplex support
- IEEE 802.3x Flow Control
- Cables: single-mode and multi-mode fiber
- LED report (per port): Link/Act
Software
VLAN
- IEEE 802.1Q Tagged VLAN
- Port-based VLAN
- Number of VLANs: 255 per device (max.)
Priority Queues (QoS)
- Standard: IEEE 802.1p
- Number of queues: 4
Spanning Tree
Standard: IEEE 802.1D
Multicast
- IGMP v2
- IGMP Snooping
- DVMRP
- PIM-DM
Access Security
- MAC based: user-specified MAC addresses
- VLAN based: ingress checking enable/disable
- Port based: MAC address learning per port enable/disable
- IEEE 802.1x Port-based Network Access Control *
MultiLink Trunking (MLT)
Enables grouping of links between the switch and another switch or a server
to provide higher bandwidth of up to 8 10/100 ports or up to 6 GBIC ports
with active redundant links. A multi-link is defined as trunked ports spanning
multiple units of the stack for fail-safe connectivity to mission-critical servers
and the network center.
- Number of Fast Ethernet ports per trunk: 8 (max.)
- Number of Fast Ethernet ports per multi-link trunk: 8 (max.)
- Number of Gigabit ports per multi-link trunk: 6 (max.)
- Number of trunks per switch: 6 (max.)
- Number of trunks per stack: 36 (max.)
- Number of multi-link trunks per stack: 6 (max.)
- Operation mode: load sharing
Gigabit Port Trunks
- Number of ports per trunk: 6 (max.)
- Number of trunks per stack: 6 (max.)
- Operation mode: load sharing