Connecting To A Power Source - AVERATEC N1200 Series User Manual

Connecting to a Power Source

Connecting the AC Adapter
A universal AC adapter is provided to supply your computer with
power and also charge the computer's battery pack. The adapter's
AC input voltage can range anywhere from 100 to 240 volts,
covering the standard voltages available in almost every country.
To connect the computer to an external power source:
Warning
Do not use inferior extension cords as this may result in damage to your notebook. The notebook comes with its own
AC adapter. Do not use a different adapter to power the computer.
Whenever possible, keep the AC adapter plugged into the notebook to recharge the battery.
Warning
Never turn off or reset your notebook while the hard disk is in use; doing so can result in loss or destruction of your
data. Always wait at least 5 seconds after turning off your notebook before turning it back on; turning the power on
and off in rapid succession can damage the notebook's electrical circuitry.
2-1
Getting Started
Chapter 2