Connecting A Printer - AVERATEC Notebook computer User Manual

Precautions for Handling Optical Discs
Keep these precautions in mind when handling optical discs.
Always hold the disc by the edges; avoid touching the surface of the disc.
Use a clean, dry, cloth to remove dust, smudges, or fingerprints. Wipe from the center outward.
Extremes in temperature may damage discs. Store discs in a cool dry place.
Do not use benzene, thinners, or cleaners with detergent. Only use optical disc cleaning kits.
Do not bend or drop the discs.
Do not place objects on top of discs.
Warning: Do not insert any foreign objects into the disc tray. Do not
force the tray to open or close manually. When not in use, keep the
tray closed to prevent dust or dirt from entering the drive unit. If you
experience difficulty when removing a disc, stretch a paper clip (or
use a pin or a thin metal rod) and insert it into the emergency eject
hole located on the front panel:
The disc tray should eject immediately. This procedure can also be used to remove a disc from the
drive when the notebook is powered off.

Connecting a Printer

To connect a USB printer to your notebook via the USB port, plug the USB cable into one of the available
USB ports found on the right side of your notebook computer.
Note: Before you can use your printer, you may have to install the driver first. Consult the
manufacturer of your USB printer for additional information.
16 of 48