Tone Or Pulse - Brother HL-4140CN User Manual

Chapter 7
e
Press Name:
Number/Address:
Resolution: or
PDF Type:
f
Do one of the following:
 If you chose Name:, enter the name
(up to 15 characters) by pressing the
buttons on the Touchscreen.
Press OK.
 If you chose Number/Address:,
enter the new number (up to 20
digits) or E-mail address (up to 60
digits) by pressing the buttons on the
Touchscreen.
Press OK.
If you chose Resolution:, press

one of the available resolution
options displayed on the
Touchscreen.
 If you chose PDF Type:, press one
of the available file type options
displayed on the Touchscreen.
Note
How to change the stored name or
number:
If you want to change a character, press
d or c to position the cursor under the
character you want to change, and then
press . Re-enter the character.
The LCD will display your new setting.
g
Do one of the following:
 To finish changing, press OK.
 To change more details, go to
step f.
h
Press Stop/Exit.
50

Tone or Pulse

If you have a Pulse dialling service, but need
to send Tone signals (for example, for
telephone banking), follow the instructions
below. If you have Touch Tone service, you
will not need this feature to send tone signals.
a
Lift the handset of the external
telephone.
b
Press # on the machine's control panel.
Any digits dialled after this will send tone
signals.
When you hang up, the machine will
return to the Pulse dialling service.
7