MS-7411 Mainboard
Jumper
Clear CMOS Jumper: CLR_CMOS2
There is a CMOS RAM onboard that has a power supply from an external battery to
keep the dasta of system configuration. W ith the CMOS RAM, the system can auto-
matically boot OS every time it is turned on. If you want to clear the system configuration,
set the jumper to clear data.
CLR_CMOS2
Important
You can clear CMOS by shorting 2-3 pin while the system is off.
Then return to 1-2 pin position. Avoid clearing the CMOS while the
system is on; it will damage the mainboard.
2-16
1
1
Keep Data
3
1
3
Clear Data