Contents Connect devices Back connector Side connector Connect a computer Notice Use a Conditional Access Module Use Philips EasyLink Important Use a Kensington lock Product information Your TV Supported display resolutions Side controls and indicators Multimedia Remote control Tuner/Reception/Transmission Remote control...
Philips is committed to develop, produce and warranty! Never attempt to repair the TV market products that cause no adverse health yourself. effects. Philips confirms that if its products are • Use the TV and accessories only as handled properly for their intended use, they intended by the manufacturer.
Page 5
Copyright Kensington and Micro Saver are registered US trademarks of ACCO World corporation with issued registrations and pending applications in other countries throughout the world. Manufactured under licence from Dolby Laboratories. Dolby and the double D symbol are trademarks of Dolby Laboratories. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC...
Never expose the TV to rain or water. that can support the combined weight of Never place liquid containers, such as the TV and wall mount. Koninklijke Philips vases, near the TV. If liquids are spilt on Electronics N.V. bears no responsibility...
Page 7
Screen care Risk of damage to the TV! • Before you connect the TV to the power • Avoid stationary images as much as outlet, ensure that the power voltage possible. Stationary images are images matches the value printed on the back that remain on-screen for extended of the TV.
Page 8
Disposal of your old product and Environmental efforts batteries Philips continuously focuses on lowering the environmental impact of its innovative consumer products. We aim our efforts towards environmental improvements Your product is designed and manufactured during manufacturing, reduction of harmful...
3 Your TV Side controls and indicators Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your TV at www.philips.com/welcome. This section gives you an overview of commonly used TV controls and functions.
Remote control (Standby-On) • Switches the TV to standby if it is on. • Switches on the TV if it is in standby. MENU Toggles the main menu on or off. c MHEG/TELETEXT Toggles teletext on or off. SOURCE Selects connected devices. e Colour buttons Select task or options.
Page 11
Remote control usage PICTURE (Smart picture) Launches the picture menu. When using the remote control, hold it close SOUND (Smart Sound) to the TV and point it at the remote control Launches the sound menu. sensor. Make sure that the line-of-sight between the remote control and TV is not +/- (Volume +/-) blocked by furniture, walls or other objects.
4 Use your TV To switch on • If the standby indicator is off, press (Power) at the side of the TV. • If the standby indicator is red, press This section helps you perform basic TV (Standby-On) on the remote control. operations (see ‘Use more of your TV’...
Adjust TV volume Switch channels with the channel grid The channel grid allows you to view all available channels in a grid format. Press OK. » The channel grid appears. Press to browse the channel grid. To increase or decrease volume Press OK to select a channel.
5 Use more of Rename devices from the home menu your TV After adding a new device to the home menu, you can rename it to your preference. Access TV menus MENU. Press Press to select a device to Menus help you to install channels, change rename.
Change picture and sound [Game]: Applies settings for games. • • [Energy saving]: Applies low-energy settings settings. [Natural]: Applies the best picture • Change picture and sound settings to suit quality. your preferences. You can apply pre-defined [Custom]: Lists customised picture •...
Page 16
Change picture format [Digital Crystal Clear]: Fine-tunes each • pixel to match surrounding pixels. This Press FORMAT. produces a brilliant, high-definition image. » A picture format bar appears. [Dynamic contrast]: Enhances • contrast. A [Medium] setting is Press to select a picture format. recommended.
Page 17
Use smart sound [Auto format]: (Not for PC mode.) Automatically Use smart sound to apply pre-defined sound displays the suitable settings. picture format. If not, Press SOUND. widescreen is applied. » The [Smart sound] menu appears. [Super zoom]: (Not for HD and PC mode.) Press to select the following settings.
Page 18
Manually adjust sound settings [Auto volume levelling]: Automatically • reduces sudden volume changes, for MENU. Press example, when switching channels. to select [Setup] > Press [Delta volume]: Levels out volume • [Sound]. differences between channels or » The [Sound] menu appears. connected devices.
Use the universal access Use advanced teletext menu features You can activate the universal access menu Access the teletext options menu during the first installation. Once enabled, you Access the teletext features through the can quickly access the visually impaired and teletext options menu.
Select teletext subpages Select [Favourite], then press OK. » Only channels in the favourite list A teletext page can hold several subpages. appear in the channel grid. Subpages are displayed on a bar next to the main page number. Press MHEG/TELETEXT . Note »...
Use the Electronic Add a channel to a favourite list Programme Guide EPG is an on-screen guide available for digital • View all channels before adding a channel to a favourite list. channels. EPG allows you to: • View a list of digital programmes being broadcast When watching TV, press OK.
Use the TV clock Use the EPG options menu Use the EPG options menu to set or clear You can display a clock on the TV screen. The reminders, change day and access other useful clock displays the current time using time data EPG options.
Use timers Change the clock mode Press MENU. You can set timers to switch the TV to to select [Setup] > Press standby at a specified time. [Installation] > [Clock] > [Auto clock]. to select [Automatic] or Press [Manual]. • Set the TV clock before you use timers.
Automatically switch the TV on (on Enter your code using the Numeric timer) buttons. » Follow the on-screen instructions to You can switch the TV to a specified channel create or change your PIN code. at a specified time, from standby or power-on mode.
Page 25
Lock the TV for a specific time Repeat the process to lock or unlock more channels. Press . to select [Setup] > Press Note [Features] > [Lock after]. » You are prompted to enter your PIN • Switch the TV off and on again for the change to code.
Use subtitles Select a subtitle language on digital TV channels You can enable subtitles for each TV channel. Subtitles are broadcast via teletext or DVB-T Note digital broadcasts. With digital broadcasts, you • When you select a subtitle language on a digital TV can select a subtitle language.
» A slide show begins from the selected Caution photo. • Philips is not responsible if the USB storage device Press the following buttons to control the is not supported, nor is it responsible for damage or slide show: loss of data from the device.
Listen to music Disconnect a USB storage device In the USB thumbnail browser view, Caution select [Music] and press to enter. GUIDE to switch between • Press • Follow this procedure to avoid damage to your USB storage device. thumbnail and file browsing views. Press to select a music track or album.
Update the TV software Update using a USB device Connect your USB storage device to the TV. Philips continuously tries to improve its If the software update screen does not products and we recommend that you appear automatically, select [Setup] >...
Change TV preferences Access decoder channel Use the preferences menu to customise your You can map channels provided through a TV settings. decoder or descrambler to your TV channel selection. In this way, you can select these MENU. Press channels by using the RC of your TV. The Select [Setup] >...
Start a TV demo You can use demonstrations to better understand the features of your TV. Some demos are not available on certain models. Available demos are displayed in the menu list. Press DEMO on the remote control. Press to select a demo and press OK to view it.
6 Install channels Step 3 Install channels Automatically installs the available analogue and digital TV channels and digital radio channels. The first time you set up your TV, you are prompted to select a menu language and From the channel installation guide to install TV and digital radio channels (if screen, select [Full installation].
Manually install channels Press BACK when the new channel is found. This section describes how to search and Press to select [Store as new store analogue TV channels manually. channel] to store the new channel under a new channel number. Step 1 Select your system Press OK to enter [Store as new channel], then press OK.
Rename channels Press to move the highlighted channel to the desired location, then press OK. You can rename channels. The name appears when you select the channel. OPTIONS. Press When watching TV, press OK to display » [Done reordering] appears on the screen.
7 Connect devices b EXT 2 (Y Pb Pr and AUDIO L/R) Analogue audio and video input from analogue or digital devices such as DVD players or game consoles. This section describes how to connect devices with different connectors. Examples are provided in the Quick Start.
d EXT 1 (CVBS and RGB) g SERV. U Analogue audio and video input from For software update. analogue or digital devices such as DVD players or game consoles. Side connector a COMMON INTERFACE Slot for a Conditional Access Module (CAM).
Connect a computer d USB Data input from USB storage devices. Before you connect a computer to the TV • Set the screen refresh rate on your computer to 60Hz. • Select a supported screen resolution on your computer. Connect a computer with one of the following connectors: Note (Headphone)
Use a Conditional Access HDMI cable and HDMI-DVI adaptor • Module A Conditional Access Module (CAM) is PC AUDIO IN/ PC IN(AUDIO) provided by digital TV service operators to decode digital TV channels. Note • Refer to the documentation from your service operator on how to insert a smart card into the Conditional Access Module.
HDMI connectors can be controlled by a single remote control. Note • Note Do not enable Philips EasyLink if you do not intend to use it. • The EasyLink-compliant device must be switched on and selected as the source.
Use a Kensington lock Use one-touch standby Press (Standby-On) on the TV’s or There is a Kensington security slot at the device’s remote control. back of the TV. Prevent theft by looping » The TV and all connected HDMI a Kensington lock between the slot and a devices switch to standby.
Supported multimedia file formats: Product information is subject to change • Images: JPEG without notice. For detailed product • Audio: MP3 information, go to www.philips.com/support. Note Supported display resolutions • Multimedia file names must not exceed 128 characters. Computer formats •...
• Dimension (WxHxD): 787.51 x 505.1 Supported TV mounts x 80.5 (mm) • Weight: 7.8 kg To mount the TV, purchase a Philips TV • With TV stand mount. To prevent damage to cables and • Dimension (WxHxD): 787.51 x connectors, be sure to leave a clearance of 547.26 x 221.43 (mm)
• Check that the picture settings are cable. If the blinking reoccurs, contact correctly set. Philips Consumer Care. There is poor TV reception from an antenna You forgot the code to unlock the TV lock connection: feature •...
There is poor picture quality from connected There is a picture but the sound quality is devices: poor: • Check that the devices are connected • Check that the sound settings are properly. correctly set. • There is a picture but sound comes from one Check that the picture settings are speaker only: correctly set.
Contact us If you cannot resolve your problem, refer to the FAQs for this product at www.philips. com/support. If the problem remains unresolved, contact Philips Consumer Care in your country as listed in the Addendum. Warning • Do not attempt to repair the product yourself. This may cause severe injury, irreparable damage to your product or void your warranty.
10 Index common interface computer connect 37, 44 display resolution Conditional Access Module connect analogue antenna fine-tune 37, 44 antenna connectors HDMI 35, 44 overview batteries 8, 41 bracket for wall mount content ratings country care decoder channel decoder default settings channel grid demo channels...
Page 47
EasyLink language disable menu enable subtitle one-touch play troubleshoot list one-touch standby system audio control favourites list end of life location environmental care country e-sticker home or shop lock Kensington lock lock channels factory settings lock connected devices favourites list PIN code add to list ratings lock...
Page 48
parental rating screen care settings connect 37, 44 picture resolution sound 15, 18 picture format settings assistant shop mode change slideshow troubleshooting picture settings view PIN code with music pixel plus link smart card power smart picture preferences smart settings 15, 17 product specifications smart sound...
Page 49
Table of Pages technical specifications teletext features menu subpages Table of Pages timer on timer 23, 24 sleep timer standby transmission 41, 43 troubleshooting TV lock lock channels lock connected devices PIN code ratings lock TV overview universal access menu disconnect USB listen to music update software...