Advanced Settings - System Configuration - Lux Products LUXPRO PSPU732T Instruction Manual

ADVANCED SETTINGS - SYSTEM CONFIGURATION

!
IMPORTANT: By inadvertently modifying system configuration settings, you may seri-
ously degrade HVAC system performance.
> >
Choose system heating and cooling equipment - remember all you need to do is toggle the
appropriate button until the correct setting appears.
• Choose HEAT PUMP or 2 STAGE HEAT PUMP or AIR CONDITIONING or NO COMPRESSOR -
please review the wiring table and diagram for wiring instructions.
• Choose FURNACE OFF (No Furnace) or ELECTRIC FURNACE or EMERGENCY ELECTRICAL
FURNACE (additional electric furnace which will come on in emergency mode in conjunction
with electric furnace) or GAS FURNACE or OIL FURNACE or 2 STAGE GAS FURNACE; please
review the wiring table and diagram for wiring instructions.
• CYCLE RATE: Set Maximum compressor cycles per hour. We recommend that the factory default
be maintained for optimal performance..
• AUTO CHANGE: Set the minimum difference between Auto Mode, Heat and Cool temperature set-
points. We recommend that the factory default be maintained for optimal performance.
34 LUXPRO ® PSPU732T