Appendix; Ways To Charge Your Nüvi; Calibrating The Screen; Resetting The Nüvi - Garmin Volvo nuvi 760 Owner's Manual

a
PPendix
a
PPendix
Ways to Charge Your
nüvi
• Use the vehicle mount.
• Use the USB cable.
• Use the AC adapter cable.

Calibrating the Screen

If the touch screen is not responding
properly, calibrate the touch screen. Turn
the nüvi off and then back on. Slide the
Power
key to the right (lock). Hold your
finger on the screen for about 30 seconds
until the calibration screen appears.
Follow the on-screen instructions.
Resetting the nüvi
If the nüvi screen stops functioning, turn
the nüvi off and on again. If this does not
help, slide the Power
hold for 8 seconds. Turn the nüvi back
on. The nüvi should operate normally.
6
key to the left and
Locking Your nüvi
Garmin Lock is a theft-deterrent system
™
that locks your nüvi. Each time you turn
on the nüvi, enter the PIN or drive to the
security location.
1. Touch Tools
Security.
2. Touch the button below
Lock.
3. Enter a 4-digit PIN and drive to a
security location.
What is a Security Location?
Select a location you return to often,
such as your home, for your security
location. If the nüvi has satellite signals
and you are at the security location, you
do not need to enter the PIN.
noTe: If you forget your PIN
and your security location, you
must send your nüvi to Garmin
to get it unlocked. You must also
send a valid product registration
or proof of purchase.
Volvo nüvi 760 Owner's Manual
> Settings >
Garmin