Hotpoint EG52 Instructions For Installation And Use Manual page 15

CARE AND CLEANING
COOKER FINISH
Vitreous Enamel
Hotplate, pan supports,
hotplate front trim,
burner caps, roasting dish,
grill pan, main oven base,
inside of grill compartment,
inside of doors.
Paint
Side trims, plinth, fascia
bottom trim, fascia end
caps, side panels,
door handles
Aluminium
Hotplate side trims, hotplate
burner bodies, lid rear trim,
rear flue grille.
Glass
Chromium Plating
Oven shelves, grill pan grid,
grill pan handle support
Plastic
Grill pan handle, control
knobs
CLEANING METHOD
Cloth wrung out in warm soapy water. Stubborn
stains can be removed with a cream paste,
liquid cleaner or by rubbing with fine steel wool
soap pads.
Check that the cleaning agent is approved by the
Vitreous Enamel Association.
Wash with a cloth wrung out in warm soapy water
only.
DO NOT USE ABRASIVES.
Similar to paint cleaning above. Use a nylon brush to
remove any cleaning materials, water or dirt from the
hotplate burner bodies.
As for enamel cleaning. Polish with a clean dry cloth
or kitchen roll.
Wipe with a cloth wrung out in warm soapy water.
A fine steel wool soap pad e.g. Brillo, Ajax, or a
chrome or stainless steel cleaner may be used.
Wipe with a cloth wrung out in warm soapy water.
Stubborn stains can be removed with a cream
cleaner.
15