Exposure Menu - Honeywell HD3DS Configuration Manual

Exposure Menu

EXPOSURE LENS
Note Only DC mode is supported at this time.
Choosing MANUAL mode may cause the camera
to operate incorrectly.
1. Select DC.
2. Set the DC LEVEL to adjust the brightness
level of the monitor screen. Select a value
from 1 to 100 (100 = brightest). The default
setting is 30. Set the FOCUS TARGET to
the maximum value for a clear image.
3. Select E. SHUTTER to set the shutter
speed. You can select from 22 different
shutter speeds, from X1024 to 1/100000.
DC-AUTO is the default shutter speed for
both indoor and outdoor use. Select
1/100FLC to run the camera in flickerless
mode.
Note The SENSE-UP menu cannot be
controlled if the E. SHUTTER setting is
above 1/60.
6