Honeywell HD3DS Configuration Manual page 13

3. Select BW -> COLOR to set the light level at which the camera switches from night to
day mode. This number should be lower than the value for COLOR -> BW.
4. Set READ TIME to set the time interval delay before switching from day mode to
night mode. Select a value from 3 seconds to 12 seconds.
Note SMART IR and EX_IR INT. are not supported.
DAY&NIGHT NIGHT C.
NIGHT C. reduces color saturation in low light when D&N MODE is set to COLOR.
Select a value for from 000 to 100. The default setting is 050.
Note NIGHT C. is not adjustable when 3D DNR is on.
DAY&NIGHT NIGHT A.
NIGHT A. reduces edge sharpness in low light when D&N MODE is set to COLOR.
Select a value from 000 to 100. The default setting is 050.
Note NIGHT A. is not adjustable when 3D DNR is on.
13