Turn List; Gps Info Page - Kenwood DNX6140 Instruction Manual

- _ . _ - - - _ . _ - -
Turn List GPS Info Page
[Tl Sky
view
~ii
Satellite signal-strength bars
From the Menu page, touch the signal strength
bars in the upper left corner to view the GPS Info
page. Or, from the Menu page, touch Tools> GPS
Info.
The Turn List displays a list of turn-by-turn
instructions for your entire route, as well as arrival
information.
While navigating a route, touch the text bar on
the map page to open the Turn List. Or, from the
Menu page, touch Tools> Turn List.
}[) N"If'9"lion:
l~
f",el
B
r.;o 'f. _ C'I
~
C'
"!'f:i)
Wi
~
n;-.
BIKK
O.HEB·06 LOlL
N 38'51.395
12
WOY447.955
00;
[Ql .
1111 IIIIIIII
!
In~,J,
,1'; 1t'!
~1"
I1q 1')
l·~
17 2J
i.1
hl
GI'S Settings
[I
Direction of this turn
~
Distance to this turn
~
Turn directions
Touch View All to see all the turns on the route. Touch
. . a n d " to scroll through the list
fouch a turn to see the turn on a map (the Next Turn
page).
Next Turn Page
Touch" a n d " to scroll through all the turns on
the route. Touch
+.
and ."":. to zoom in and out of the
turn on the map.
The sky view shows the satellites you are
receiving. The satellite signal-strength bars
indicate the strength of each satellite you are
receiving. A solid bar indicates the GPS satellite is
ready for use.
GPS Settings
From the Menu page, touch Settings> General
>
GPS. You can also access the GPS Settings by
touching the GPS Settings button on the GPS
Info page.
Simulator Mode-touch Off to turn the GPS receiver
off
Set Position-set your position, if Use Indoors is
enabled. Select your location on the map and touch OK.
WAAS/EGNOS-disable and enable WAAS/EGNOS.
WA,A,S and EGNOS are systems of satellites and ground
stations that provide GPS signal corrections, giving you
even better position accuracy. To learn about WAAS and
EGNOS, visit www.garmin.com/aboutGPS/waas.html.
English 17