Specifications - Dixon Kodiak Diesel Safety Instructions And Operator's Manual

Kodiak diesel ztr
Table of Contents

Advertisement

SPECIFICATIONS

CHASSIS:
11 GA - rectangular tube
SEAT:
Designed for operator comfort by use of high-density closed
cell foam padded back and arm rests, upholstered with
Cordura
and aft. Mounted on operator suspension system.
MOWER DECK:
Made of 11 GA and 7 GA fabricated welded construction with
multiple 1/4" and 3/8" reinforcement ribs. Three blades
combine for a 52" cut width. Cut height approximately 1.5" to
5" via 18 position lift handle with foot assist.
BLADE DRIVE:
Electric clutch
DRIVE SYSTEM:
Each rear wheel is independently driven by a HydroGear
12cc pump with fans and TJ230 wheel motor.
ENGINE:
The mower is powered by a 20 HP Yanmar Diesel twin
cylinder engine, overhead valve, liquid cooled, full pressure
lubrication with oil filter.
STARTING SYSTEM: Electric by key switch operation with safety interlocks on
parking brake and blade drive clutch.
TIRES:
Front 13 x 6.5 x 6 smooth tread (16-21 lbs)
Rear 23 X 10 X 10 Turf Master (8-14 lbs)
CAPACITIES:
Fuel - 11 gallon (approximately)
Hydrostat Oil tank - 4 quart with in-line 25 micron filter &
Dixon Blue
Engine - 2 qts. SAE 10W30 (with filter)
Radiator - 50/50 mix
DIMENSIONS:
Width
(approximate)
Height
Length
Weight
Additional information may be provided elsewhere in this manual.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
®
KODIAK
DIESEL
water-repellent fabric. Seat is adjustable fore
TM
15w50 Synthetic Hydrostatic Fluid
TM
47" outside rear wheel measurement
46.5"
79" hitch tab to front
1135 lbs.
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kodiak diesel ztr series

Table of Contents