Machine Storage - Bissell Proheat Premier User Manual

Operations
Hard floor cleaning (select models only)
Your deep cleaner may have come with a hard
floor attachment and 2X Hard Floor solutions
Formula. if not, these products are available for
purchase by contacting the bissell Consumer
Care department by phone or at
the website. The hard floor tool provides
effective cleaning for linoleum, vinyl, and
tile floors. Caution: Do not use on unsealed
hardwood floors.
1. Vacuum or sweep thoroughly to pick up any
loose debris and pet hair.
2. Move any furniture, if needed.
3. Attach the hard floor tool onto the bottom
of the machine by hooking it into the nozzle
and swinging it down until it clicks into place.
4. Follow instructions on page 7 to fill the
2-in-1 water tank.
5. Plug into an outlet and turn the power
switch ON.
6. slowly move the machine forward and
back over hard floor surface one time while
depressing trigger. Caution: Do not overwet.
7. Repeat the motion without pressing
the trigger using the hard floor tool
to squeegee and suction up the
dirty water.
8. Allow adequate time for floors to dry.
9. Remove hard floor tool, rinse and dry
before storing.

machine storage

Once your cleaning is complete, make sure the
2-in-1 water tank is emptied, rinsed out, and
dried before the next use.
notE: Store cleaner in a protected, dry area.
Since this product uses water, it must not be
stored where there is a danger of freezing.
freezing will damage internal components
and void the warranty.
www.bissell.com
12
3.
800.237.7691
WaRnInG
To reduce the risk of fire and electric shock- when
cleaning a hard floor, the BISSELL bare floor tool
160-0208 must be used and it must only be used with
BISSELL 2X Hard Floor Solutions cleaning fluid intended
for use with this appliance.