Bissell Proheat Premier User Manual page 10

Operations
clean-up
1. Turn machine off. Remove the tank from the
base of the machine by lifting up on the tank
carry handle. Carry like a bucket to a utility sink or
outside where you will dispose of the dirty water.
2. Unlatch the top of the tank from the bottom
by lifting up on the tank latches on either side
of the tank.
3. Remove the top of the tank by lifting up on
the handle.
4. lift the bottom portion of the tank; pour out
dirty water in the sink through the rectangular
shaped opening in the corner of the tank.
notE: you may notice hair & debris deposits
on the carpet or in the tank that were loosened
by the cleaning action. this debris should be
picked up and thrown away. check the red lint
filter near the duct on the back of the machine
base for debris and remove before continuing.
5. Fill the heavy duty bladder with clean hot
tap water, following instructions on page 7.
notE: Remember to secure the tank latches
and test to make sure it is secure before
picking up the tank.
6. Water rinse (recommended). Rinsing
is an optional step that can be done during the
cleaning process or after the carpeted area has
been completed. empty the heavy-duty bladder
if necessary, and refill with hot tap water only.
Replace the tank on the machine. Take care to
do a forward (wet) stroke by depressing the
trigger, and a backward (wet) stroke, followed by
a forward and backward (dry) stroke, releasing
the trigger. Continue this until the water you see
coming up the nozzle is clear. (see page 13 for
more machine care tips.)
www.bissell.com
10
800.237.7691
1.
3.
2.
4.
Filter