Top Cover - HP ProBook 440 G1 Maintenance And Service Manual

Top cover

NOTE:
Top cover spare part kits include the touchpad assembly.
Description
Top cover with a fingerprint reader (includes fingerprint reader assembly)
Top cover without a fingerprint reader (includes fingerprint reader plastic insert, bracket, and
screws)
Top cover for use in models with a fingerprint reader, RCTO (includes touchpad assembly,
fingerprint reader plastic insert, bracket, and screws)
Before removing the top cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5. Remove the following components:
a.
Service door (see
b. Keyboard (see
c.
Optical drive
Remove the top cover:
1.
Position the computer upside-down with the front toward you.
54 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page 37).
Service door on page
Keyboard on page 50)
(Optical drive on page
38).
42)
Spare part number
721540-001
721541-001
747998-001