Service Door - HP ProBook 440 G1 Maintenance And Service Manual

Service door

Remove the service door to access the memory module slot, hard drive, and other components.
Before removing the service door, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
To remove the service door:
1. With the battery bay toward you, remove the optional security screw (1), (if the optional security
screw is being used, see
service door release latches (2) to release the service door.
NOTE:
bay.
2. Slide the service door toward the front of the computer (3) and lift (4) to remove the service door.
38 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
Battery on page
Using the optional security screw on page
If you do not want to use the optional security screw, you can store it inside the battery
37).
39), and then slide the