Kenwood KDC-X997 Manual page 82

Direct access tuning
(Function of remote control)
You can tune to a station directly by entering its frequency or channel.
1. Press [DIRECT] on the remote control.
"– – – –" appears and enter the Direct access tuning mode.
2. Press [DIRECT] on the remote control to Select a direct access tuning method.
Tuning method
Frequency
Channel
Exiting Direct Access Tuning
3. Press the number buttons on the remote control to enter the frequency or channel.
Example of frequency input:
Desired frequency
92.1 MHz (FM)
810 kHz (AM)
4. Press [ENT] on the remote control.
Exiting Direct access tuning mode
Press [6] on the remote control.
Display
"– – – –"
"HD –"
—
Press button
[9], [2], [1]
[8], [1], [0]