Kenwood KDC-X997 Manual page 26

DSP preset
You can register the values set the DSP control items.
1. Set the DSP control items
2. Press [Control] knob.
Enters the Function setting mode.
3 Select "Audio Control"
4. Select a memory number ("Memory 1" or "Memory 2") using [Control] knob.
5. Select "YES" using [Control] knob.
"Memory Completed" appears.
Exiting from the Function setting mode
Press and hold [1/6].
When reset
When this unit is reset, all setting values stored in "Memory 1" are applied to the source.
> "Pro Setup" > "Audio Preset" > "Memory" using [Control] knob.