Kenwood KDC-X997 Manual page 100

Selecting the Bluetooth device you wish to connect
When two or more Bluetooth devices have already been registered, you need to select the Bluetooth device
you wish to use.
1. Press [Ú].
"BT MODE" appears and enter the Bluetooth mode.
2. Select "Settings"
(to select the audio player) using [Control] knob.
3. Select a Bluetooth device using [Control] knob.
*
' (name)' or '-(name)' is displayed.
*
" ": The selected Bluetooth device is busy.
"-": The selected Bluetooth device is on standby.
" " (blank): The Bluetooth device is deselected.
Exiting from the Bluetooth mode
Press [Ú].
When no device can be selected
If a cell phone is already selected, deselect it, and then select a different one.
If you cannot select a device using the audio player, connect the device with the audio player.
> "Pairing" > "Phone Selection" (to select the cell phone) or "Audio Selection"