Programme Chart - Hotpoint BFT680 Instructions For Installation And Use Manual

D

Programme Chart

Select the most suitable programme for the type of dishes and how dirty they are. To select the wash programme see the chart below:
Auto Wash Cycle: the dishwasher is equipped with a Sensor System that measures how dirty the dishes are and decides the most
suitable programme for the load, setting the optimal cycle length, number of rinses and water level. This provides a more efficient and
economic wash cycle.
dishes, pots and
cycle.
dly cycle, with low
energy consumption
and dishes.
cycle to be used for
slightly dirty dishes.
except when the
extra drying option
Special cycle to be
on the two racks
delicate for glassware
and glasses on the
duty for the pans on
To optimise wash performance and save on energy, try yo use the dishwasher with a full wash load. If it takes some time to fill
your dishwasher, use the soak cycle to avoid caked on food and build up of bad odours.
8
Very dirty dishes, Pre-wash with hot water at 40°C
pots and pans (not to Wash at 65°C .
be used with delicate 2 Rinses with cold water
items). Rinse with hot water at 65°C .
Drying.
N ormally dirty Wash at 50°C .
C old Rinse
pans. Standard daily Rinse with hot water at 70°C .
Drying.
Environmentally-frien-
2 C old pre-washes
Wash at 50°C
levels, suitable for Hot rinse at 65°C
normally dirty pans Drying
Economic and fast
Run cycle
Short wash at 50°C
immediately after use.
Hot rinse at 62°C
Without drying
has been selected.
Pre-wash of dishes,
pots and pans while
Short cold wash to prevent food
waiting for the load
residue from drying on the dishes.
to be completed after
the subsequent meal.
Wash at 52°C
used for delicate Rinse at 45°C
items, which are Hot rinse at 65°C
more sensitive to high Drying
temperatures.
Wash differentiated
C old pre-wash
Wash at 52°C
Lukewarm rinse at 45°C
upper rack and heavy Hot rinse at 65°C
Drying
the lower rack.
(
W ITH
EXTRA
)
DRYIN G