Hotpoint BFT68 Instructions For Installation And Use Manual

Hotpoint dishwasher instructions for installation and use bft68

Advertisement

Quick Links

Instructions for Installation and Use
Dishwasher
Model BFT68

Advertisement

Table of Contents
loading

Summary of Contents for Hotpoint BFT68

  • Page 1 Instructions for Installation and Use Dishwasher Model BFT68...
  • Page 3: Table Of Contents

    Care and Cleaning Troubleshooting Information for Test Labs After Sales Service Hotpoint Guarantee Key Contacts Retention of this Instruction Book This Instruction Book must be kept handy for reference as it contains important details on the safe and proper use of the appliance.
  • Page 5: Electrical Connection

    ‘N’ LIVE ‘L’ Changing the Mains Lead A lead can be ordered from Hotpoint Service UK: 08709 066 066 or Republic of Ireland: 1850 302 220 If you have damaged the existing lead or require a longer one a charge will be made. It is strongly advised that this work is carried out by a qualified electrician.
  • Page 6: For Your Safety

    2. DO NOT load dishes to wash that are soiled with ash, wax or paints. 3. DO NOT lean, sit or stand on any part of the dishwasher - this could cause injury and/or damage the appliance.
  • Page 7: Installation

    Installation Cold water connection. Choose where you want to install Connect the cold water supply your dishwasher, you can place it hose, inserting the small filter so that its sides or back panel are supplied with the dishwasher and side by side with furniture or up making sure that it is fastened tightly against the wall.
  • Page 8: Getting To Know Your Dishwasher

    Getting to know your Dishwasher E. Upper basket I. Bottom spray arm F. Top spray arm J. Salt container cap G. Basket height adjuster K. Washing filter H. Lower basket L. Detergent and rinse aid M. ‘Turbo Dry’ fan The Controls A.
  • Page 9: How To Use Your Dishwasher

    These indicator lights represent each phase corresponding to: pre-wash, wash, rinses, drying. At all times your dishwasher tells you what phase it is at. Delaying the start of a Half load. programme.
  • Page 10: Programme Chart

    To optimise wash performance and save on energy, try yo use the dishwasher with a full wash load. If it takes some time to fill your dishwasher, use the soak cycle to avoid caked on food and build up of bad odours.
  • Page 11: Before Using Your Dishwasher

    (you won't have to do this again next time) 3. Put the dishwasher funnel on the hole and pour in approximately two kilos of salt. It is normal that some water comes out of the container.
  • Page 12: Before Using Your Dishwasher

    We recommend Glist 3 in 1 for use in all Hotpoint dishwashers... Brilliant cleaning is guaranteed with Glist 3 in 1. Hotpoint only recommends Glist 3 in 1 Dishwasher tablets to give outstanding cleaning and care. It is important to use detergent specially designed for domestic dishwashers. (Always follow the manufacturers instructions.)
  • Page 13: Loading Your Dishwasher

    A and B). • Highly absorbent materials such as sponges and towels should never be placed in a dishwasher. This basket is equipped with two • If in any doubt, check with the manufacturer on items suitability for dishwasher’s.
  • Page 14: Care And Cleaning

    DO NOT use solvents or abrasives Going away to clean the exterior and rubber parts If the dishwasher is not going to be of your appliance, do not use used for some time, carry out the solvents or abrasive cleaning following: products.
  • Page 15: Troubleshooting

    - The dishwasher must first be disconnected from the electricity supply before any repairs or other work can be carried out. Switch off at the mains socket and water supply and remove the plug.
  • Page 16: Information For Test Labs

    Load for 12 Standard Settings tests (upper rack at top position) Detergent Detergent specifically intended for use with dishwashers must be used. The dispenser must be refilled before the start of each wash cycle following the instructions provided in the ‘Programme Chart’. The detergent dispenser is located on the inside panel of the door.
  • Page 17: After Sales Service

    Hotpoint appliance than us - the manufacturer" As part of our commitment to you, all Hotpoint appliances have the added benefit of a fully inclusive parts and labour guarantee for the first 12 months. In addition to this you also have the advantage of free replacement parts for the first 5 years when fitted by a Hotpoint engineer.
  • Page 18: Hotpoint Guarantee

    All Hotpoint appliances carry a fully inclusive 12 month parts and labour guarantee as well as free replacement parts for the first 5 years (except microwaves, selected integrated appliances and cooker hoods, which have a one year guarantee) provided that they are fitted by a Hotpoint engineer.
  • Page 20: Key Contacts

    Over 1200 trained specialists, directly employed by us, ensure that you can have complete confidence in (Open 8 to 8 Mon - Fri, 8 to 6 Sat, 10 to 4 Sun & Bank Holidays) Note: Our operators will require the following information: General Domestic Appliances Limited, Morley Way, Peterborough, PE2 9JB.

Table of Contents