Hotpoint BFI62 Instructions For Installation And Use Manual

Hotpoint BFI62 Instructions For Installation And Use Manual

Hotpoint dishwasher instructions for installation and use bfi62

Advertisement

Instructions for Installation and Use
Dishwasher
Model BFI62

Advertisement

Table of Contents
loading

Summary of Contents for Hotpoint BFI62

  • Page 1 Instructions for Installation and Use Dishwasher Model BFI62...
  • Page 3: Table Of Contents

    Care and Cleaning Troubleshooting Information for Test Labs After Sales Service Hotpoint Guarantee Key Contacts Retention of this Instruction Book This Instruction Book must be kept handy for reference as it contains important details on the safe and proper use of the appliance.
  • Page 5: Electrical Connection

    ‘N’ LIVE ‘L’ Changing the Mains Lead A lead can be ordered from Hotpoint Service UK: 08709 066 066 or Republic of Ireland: 1850 302 220 If you have damaged the existing lead or require a longer one a charge will be made. It is strongly advised that this work is carried out by a qualified electrician.
  • Page 6: For Your Safety

    2. DO NOT load dishes to wash that are soiled with ash, wax or paints. 3. DO NOT lean, sit or stand on any part of the dishwasher - this could cause injury and/or damage the appliance.
  • Page 7: Installation

    Installation Cold water connection. Choose where you want to install Connect the cold water supply your dishwasher, you can place it hose, inserting the small filter so that its sides or back panel are supplied with the dishwasher and side by side with furniture or up making sure that it is fastened tightly against the wall.
  • Page 8: Getting To Know Your Dishwasher

    Getting to know your Dishwasher I. Bottom spray arm E. Upper basket J. Salt container cap F. Top spray arm K. Washing filter G. Basket height adjuster L. Detergent and rinse aid H. Lower basket The Controls A. ON-OFF Button Press this button to switch the appliance on.
  • Page 9: How To Use Your Dishwasher

    How to use your Dishwasher Modifying a wash cycle in First of all. progress. - Turn on the water supply If you have chosen the wrong cycle tap completely. - You can modify the wash cycle in - Add the correct amount of progress, if it has only just started.
  • Page 10: Programme Chart

    Select the most suitable programme for the type of dishes and how dirty they are. To select the wash programme see the chart below: To optimise wash performance and save on energy, try yo use the dishwasher with a full wash load. If it takes some time to fill your dishwasher, use the soak cycle to avoid caked on food and build up of bad odours.
  • Page 11: Before Using Your Dishwasher

    (you won't have to do this again next time) 3. Put the dishwasher funnel on the hole and pour in approximately two kilos of salt. It is normal that some water comes out of the container.
  • Page 12: Before Using Your Dishwasher

    We recommend Glist 3 in 1 for use in all Hotpoint dishwashers... Brilliant cleaning is guaranteed with Glist 3 in 1. Hotpoint only recommends Glist 3 in 1 Dishwasher tablets to give outstanding cleaning and care. It is important to use detergent specially designed for domestic dishwashers. (Always follow the manufacturers instructions.)
  • Page 13: Loading Your Dishwasher

    • Some types of glass can become opaque in appearance after they have been washed too many times in a dishwasher. • Highly absorbent materials such as sponges and towels should never be placed in a dishwasher. • If in any doubt, check with the manufacturer on items suitability for dishwasher’s.
  • Page 14: Care And Cleaning

    DO NOT use solvents or abrasives Going away to clean the exterior and rubber parts If the dishwasher is not going to be of your appliance, do not use used for some time, carry out the solvents or abrasive cleaning following: products.
  • Page 15: Troubleshooting

    - The dishwasher must first be disconnected from the electricity supply before any repairs or other work can be carried out. Switch off at the mains socket and water supply and remove the plug.
  • Page 16: Information For Test Labs

    The rinse aid container is situated on the inside of the door, you should refill it when light “D” indicates that it is empty. (If your dishwasher is fitted with a “low rinse aid” indicator light, fill the container up when the indicator light flashes or lights up).
  • Page 17: After Sales Service

    Hotpoint appliance than us - the manufacturer" As part of our commitment to you, all Hotpoint appliances have the added benefit of a fully inclusive parts and labour guarantee for the first 12 months. In addition to this you also have the advantage of replacement parts for the first 5 years when fitted by a Hotpoint engineer.
  • Page 18: Hotpoint Guarantee

    All Hotpoint appliances carry a fully inclusive 12 month parts and labour guarantee as well as free replacement parts for the first 5 years (except microwaves, selected integrated appliances and cooker hoods, which have a one year guarantee) provided that they are fitted by a Hotpoint engineer.
  • Page 20: Key Contacts

    Over 1200 trained specialists, directly employed by us, ensure that you can have complete confidence in (Open 8 to 8 Mon - Fri, 8 to 6 Sat, 10 to 4 Sun & Bank Holidays) Note: Our operators will require the following information: General Domestic Appliances Limited, Morley Way, Peterborough, PE2 9JB.

Table of Contents