Dhcp Server; Dynamic Pool Settings - D-Link AirPremier N DAP-2310 User Manual

Section 3 - Configuration
The DHCP address pool defines the range of the IP address that can be assigned to stations in the network. A Dynamic Pool
allows wireless stations to receive an available IP with lease time control. If needed or required in the network, the DAP-2310
is capable of acting as a DHCP server.
Dynamic Host Configuration Protocol (DHCP)
Function
assigns dynamic IP addresses to devices on
Enable/Disable:
the network. This protocol simplifies network
management and allows new wireless devices to
receive IP addresses automatically without the need
to manually assign new IP addresses. Select Enable
to allow the DAP-2310 to function as a DHCP server.
Input the first IP address available for assignment
IP Assigned
on your network.
From:
The Range of
Enter the number of IP addresses available for
Pool (1-254):
assignment. IP addresses are increments of the IP
address specified in the "IP Assigned From" field.
Subnet Mask:
All devices in the network must have the same
subnet mask to communicate. Enter the submask
for the network here.
Gateway:
Enter the IP address of the gateway on the network.
WINS:
Specify the Windows Internet Naming Service (WINS) server address for the wireless network. WINS is a system that determines
the IP address of a network computer that has a dynamically assigned IP address.
D-Link DAP-2310 User Manual

DHCP Server

Dynamic Pool Settings

58