Frequency/Voltage Control - Gigabyte GA-945GM-S2 User Manual

2-7

Frequency/Voltage Control

CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
CPU Clock Ratio
(Note)
System Memory Multiplier
Memory Frequency (Mhz)
: Move Enter: Select
F5: Previous Values
Incorrectly using these features may result in system instability or corruption.
Doing a overclock or overvoltage on CPU, chipsets and memory modules may result in
damages or shortened life expectancy to these components.
Please be aware that the menu items are for power users only.
CPU Clock Ratio
(Note)
This setup option will automatically assign by CPU detection.
The option will display "Locked" and read only if the CPU ratio is not changeable.
System Memory Multiplier
Wrong frequency may make system can't boot, clear CMOS to overcome wrong frequency issue.
for FSB(Front Side Bus) frequency=533MHz,
3 Memory Frequency = Host clock X 3.
4 Memory Frequency = Host clock X 4.
Auto Set Memory frequency by DRAM SPD data. (Default value)
for FSB(Front Side Bus) frequency=800MHz,
2.0 Memory Frequency = Host clock X 2.0.
2.66 Memory Frequency = Host clock X 2.66.
3.33 Memory Frequency = Host clock X 3.33.
Auto Set Memory frequency by DRAM SPD data. (Default value)
for FSB(Front Side Bus) frequency=1066MHz,
1.5 Memory Frequency = Host clock X 1.5.
2.0 Memory Frequency = Host clock X 2.0.
2.5 Memory Frequency = Host clock X 2.5.
Auto Set Memory frequency by DRAM SPD data. (Default value)
Memory Frequency (Mhz)
The values depend on "System Memory Multiplier" item.
(Note) This item will show up when you install a processor which supports this function.
GA-945GM-S2 Motherboard
Frequency/Voltage Control
[18X]
[Auto]
533
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
- 44 -
Item Help
Menu Level
Set CPU Ratio if CPU
Ratio is unclocked
ESC: Exit F1: General Help
F7: Optimized Defaults