Register A Handset To Your Telephone Base For At&T Models Tl96273/Tl96323/Tl96373/Tl96473 - AT&T TL90073 User Manual

Registration and deregistration
Adding and registering handsets
Register a handset to your telephone base
for AT&T models TL96273/TL96323/TL96373/TL96473
1. �efore you begin registration, make sure the
handset is out of the telephone base or charger
and shows To register, see user manual.
2. Put the handset you wish to register on the
telephone base cradle, not the charger.
3. �oth the handset and the telephone
base show Registering...Please wait. It
takes about 90 seconds to complete the
registration process. �oth the telephone
base and cordless handset display
HANDSET X Registered (X represents the
registered handset number), and beep
when registration completes.
If registration fails, the system will automatically
try to register again. If registration fails after
the third try, the handset displays Registration
failed, then To register, see user manual. This
may take up to 5 minutes to occur. Please start
again from Step 1 above.
NOTE: You cannot register a handset if any other
system handset is in use.
9
To register,
see user manual
Registering...
Please wait
HANDSET X
Registered