Canon PowerShot S95 Getting Started page 288

Things to
Remember
Problems
Try the suggested solutions to the common problems listed below.
You can't find transferred images.
Refer to "Changing the Transfer Destination Folder" to confirm where the destination
folder is.
Add New Hardware Wizard displays when the camera is connected to the
computer with an interface cable.
Click [Cancel] to close the window. Temporarily disconnect the camera from the
computer. Next, read Start by Checking This on the previous page and resolve the
problem.
Camera not detected, Events dialog/AutoPlay/Device Stage won't display
or images will not transfer to the computer (when camera is connected to
the computer via an interface cable).
The camera may have been recognized as another device.
Solution:
Delete the device with the following procedures.
IMPORTANT
• Computer administrator status is required to perform the following operation.
1
Display the [Device Manager] dialog.
Windows 7:
Click the [Start] menu, [Control Panel], [System and Security], [System], and [Device
Manager].
Windows Vista:
Click the [Start] menu, [Control Panel], [System and Maintenance], [System], and [Device
Manager].
Windows XP:
Click the [Start] menu, [Control Panel], [Performance and Maintenance], [System],
[Hardware] tab, and the [Device Manager] button.
Table of Contents
Mastering
the Basics
More Advanced
Techniques
Appendices
58