Canon PowerShot S95 Getting Started page 140

Correcting the Brightness and Shooting
(i-Contrast)
The camera can detect areas in the scene, such as faces or backgrounds,
that are too bright or dark and automatically adjust them to the optimum
brightness when shooting.
To suppress highlight blowout, Dynamic Range Correction is used. To bring
out shadow details, Shadow Correct is used.
• Under some conditions, the image may appear coarse or may not be
corrected properly.
• You can correct recorded images (p. 145).
You can also set the camera so that turning the Ï ring changes the DR
•
Correction or Shadow Correct settings (p. 101).
• Not available in
Dynamic Range Correction (DR Correction)
You can choose from the following Dynamic Range Correction methods:
and .
• is only available in
• With and
speed higher than
• With , he ISO speed will return to
.
• With , the ISO speed will return to
.
104
or mode.
Choose
●
After pressing the m button, press the
op buttons to choose
Make the setting.
●
Press the qr buttons or turn the Ê dial to
choose an option, then press the m
button.
X
Once set, @ will appear on the screen.
(p. 80).
, the ISO speed will return to
.
.
.
even if you set a
even if you set a speed lower han
even if you set a speed lower than
,