Autom atic w iping with ra in sensor 3:
To activate, m ov e stalk d ow nw ards to
automatic wiping with ra in sensor
position K
K .
K
K
The rain sensor detects the am ount of
water on the windscreen a nd automatically
reg ulates the windscreen wiper frequency.
The sensitivity of the sy stem can b e
adjusted by rotating the ad juster ring:
Less sensitive
= Rotate adjuster
forwards
More sensitive = Rotate adjuster
bac kwards
Upon starting the engine, automatic
wiping will need to be reselec ted.
Further information - see pages 143, 158.
Ofrecido por www.electromanuales.com
Windscreen wash system
To activate, pull sta lk towards steering
wheel.
Short pull
The wiper operates for one cycle.
Long p ull
Wash fluid is spray ed onto the windscreen,
at the same time the wip er is operated for
four cy cles.
Check regularly that the windscreen wash
sy stem is operating efficiently.
On vehicles with rain sensor 3, keep the
sensor area clean by operating the wa sh
sy stem reg ularly .
Further inform ation - see page 159.
Instru men ts, c ontrols
Rear door and tailgate window
wash wipe system 3
To activa te, rotate switch.
0
=
O ff
e
=
Wiper
f
=
Wash
Wash fluid is sprayed onto the w indow
when the stalk is moved to the second
position. The switch is spring loaded and
will return to the 'wiper' position w hen
released.
C heck regularly that the wind ow wash
system is operating efficiently.
Further information - see pag es 158, 159.
75