Download Print this page

Troubleshooting - Klipsch Mode M40 Owner's Manual

Mode headphone

Advertisement

TROUBLESHOOTING
Low or no volume
Check that audio source
is
powered on and that the volume
is
turned
up.
Check that the audio cable is properly connected and not damaged.
The headphones will not work if the power is switched on and the battery is fully
discharged. Replace AAA battery or use with power switch in the off
position.
No noise cancelling
Check that power switch is in on (forward) position.
Replace AAA
battery.
Sound in one side only or crackling sound
Check that the audio cable is properly connected and not damaged.
Power indicator flashing
Replace AAA battery.

Advertisement

loading