Systems Insight Display Leds - HP ProLiant DL360p Gen8 User Manual

Systems Insight Display LEDs

The HP Systems Insight Display LEDs represent the system board layout. The display provides status for all
internal LEDs and enables diagnosis with the access panel installed. To view the LEDs, access the HP Systems
Insight Display (on page 21).
Description
Processor LEDs
DIMM LEDs
Fan LEDs
NIC LEDs
Power supply LEDs Off = Normal
PCI riser LED
Over temp LED
AMP status LED
Power cap LED
For more information, see "Systems Insight Display LED combinations (on page 16)."
Status
Off = Normal
Amber = Failed processor
Off = Normal
Amber = Failed DIMM or configuration issue
Off = Normal
Amber = Failed fan or missing fan
Off = No link to network
Solid green = Network link
Flashing green = Network link with activity
If power is off, the front panel LED is not active. For status,
see "Rear panel LEDS and buttons (on page 11)."
Amber = Failed power supply
Off = Normal
Amber = Incorrectly installed PCI riser board
Off = Normal
Amber = High system temperature detected
Off = Disabled
Solid green = Advanced Memory Protection active
Solid amber = Memory failure has occurred.
Flashing amber = Invalid AMP memory configuration
Off = System is in standby, or no cap is set.
Solid green = Power cap applied
Component identification 15