Hardware Options Installation; Introduction; Processor And Fan Module Option - HP ProLiant DL360p Gen8 User Manual

Hardware options installation

Introduction

If more than one option is being installed, read the installation instructions for all the hardware options and
identify similar steps to streamline the installation process.
WARNING:
internal system components to cool before touching them.
CAUTION:
beginning any installation procedure. Improper grounding can cause electrostatic discharge.

Processor and fan module option

Install fans 1 and 2 only when processor 2 is installed. When only one processor is installed, install the fan
blanks in bays 1 and 2
WARNING:
internal system components to cool before touching them.
CAUTION:
configurations must contain processors with the same part number.
CAUTION:
heatsink is removed from the processor after it has been installed.
CAUTION:
processor and a heatsink or a processor socket cover and a heatsink blank.
IMPORTANT:
To install the processor and fan:
Update the system ROM.
1.
Locate and download the latest ROM version from the HP website (http://www.hp.com/support).
Follow the instructions on the website to update the system ROM.
Power down the server (on page 20).
2.
Remove all power:
3.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Extend the server from the rack (on page 20).
4.
Remove the access panel (on page 23).
5.
To reduce the risk of personal injury from hot surfaces, allow the drives and the
To prevent damage to electrical components, properly ground the server before
("Fan modules" on page 18).
To reduce the risk of personal injury from hot surfaces, allow the drives and the
To prevent possible server malfunction and damage to the equipment, multiprocessor
The heatsink thermal interface media is not reusable and must be replaced if the
To prevent possible server overheating, always populate processor socket 2 with a
Processor socket 1 must be populated at all times or the server does not function.
Hardware options installation 35