Radio Shack Deluxe FRS Owner's Manual page 35

5. Repeatedly press or until the code number you want appears.
[ ]
6. Press then repeat Steps 1–5 to set another channel/interference eliminator code com-
\
bination.
Setting the Eavesdrop Reducer Code
1. Repeatedly press until
e
\
2. Repeatedly press or until the code number you want (
[ ]
3. Press . The radio sets itself to the code you selected.
M
Adjusting the Volume
Repeatedly press or to adjust the volume. The current volume set-
[ ]
 
ting – (lowest) through (highest) – appears.
Caution: Do not hold the radio too close to your ear when the volume is
at a high setting. This could cause hearing damage.
appears.
, 
Operation

, or ) appears.
35