Before You Begin - Razor Powerwing Owner's Manual

BEFORE yOU BEgIN

Remove contents from box and check parts against part diagram below. Remove the foam separators that protect the
components from damage during shipping. Inspect the contents of the box for scratches in the paint, dents or kinked
cables that may have occurred during shipping. Because the PowerWing™ is partially assembled and packed at the
factory, there should not be any problems, even if the box has a few scars or dents.
q Estimated assembly and Set-Up Time
Allow up to 15–20 minutes for assembly.
Hex socket bolt
Folding Mechanism
q Required Tools
Tools needed to assemble are included.
(2) 5mm hexagonal key
wrenches
(included)
Brake
Handlebar assembly
Right foot platform
Coupling bolt
Front Wheel
Frame
Left foot platform
Rear caster
Rear Wheel
WaRNINg: DO
NOT USE NON-RAZOR
PRODUCTS WITH YOUR
POWERWING™.
The PowerWing™ has been
built to certain Razor® design
specifications. The original
equipment supplied at the time of
sale was selected on the basis of
its compatibility with the frame,
fork and all other parts. Certain
aftermarket products may or may
not be compatible.