Toshiba M74 Series User Manual page 93

Question
Why don't the networked devices
work?
Why doesn't the wireless network
work?
Why doesn't the My Contents feature
operate?
Why doesn't the USB HDD work?
What do the LEDs on the front of the
television indicate?
Light sensor
Remote sensor
Other problems
If your TV's problem is not addressed in this Questions and Answers section or the recommended solution has not
worked, do one of the following:
1 Turn off your TV. After 30 seconds, turn it on.
2 Turn off the TV and unplug the power cord. After 1 minute, plug the power cord in and turn on the TV.
3 Perform the Reset TV function in the Installation menu.
The LAN cables are not connected properly or at all. Connect all cables
(see page 13).
Make sure your network address is set up correctly (see page 51).
Check that the AP is powered on.
Make sure that devices are connected correctly.
Incorrect behaviour may occur with a USB Hub connection.
Check your network setup if using a network media server.
Your country/area may not support the USB HDD function.
Check the table below.
Power LED
On = Green
Standby = Red
Answer
LED indication
Green
Red
(Standby or Active Standby)
93
PROBLEM SOLVING
Condition
Power ON
Power OFF