Standby Channel Update; Location Setting; Analogue Switch-Off; Data Transfer - Toshiba M74 Series User Manual

SETTING UP YOUR TV

Standby Channel Update

If the Standby Channel Update is set to On, when the TV
is in Standby, Digital Tuning is automatically executed.
a
Select DTV Settings from the Installation menu
and press OK.
b
Press b to select Standby Channel Update and
c B b
press and /

Location setting

You can select either Home or Store mode. Home is
recommended for normal home use. Select Store when
using the television for displaying in a shop, etc.
a
Select Location from the Installation menu.
b
Press c or OK to edit Location and press
to select Home or Store.

Analogue switch-off

This is a digital television which is integrated to allow the
use of both digital and analogue services. However,
during the lifetime of this set it is very likely that analogue
services will be switched off to allow for more new digital
services.
This 'switch-off' will happen in a number of phases, which
will be advertised in your area well in advance. It is
recommended that at each phase the television is re-
tuned to ensure that existing and new digital services can
be viewed without disruption.
to select On or Off.
B
You can copy channel information from TV to USB
memory and edit the channel information by using your
PC and updates channel information to your TV.
a
Select DTV Settings from the Installation menu
and press OK.
b
B
Press
B b
and /
Table (if available) or Preset Order.
c
In case of Channel List and Transponder Table,
c
press to select USB to TV or TV to USB. In case
of Preset Order, select USB to TV.
/ b
30

Data Transfer

b
/ to select Data Transfer and press
to select Channel List, Transponder
c