Runco RS-900 Owner's Operating Manual page 68

Operation
Table 4-1. Aspect Ratio Settings (continued)
Remote
Aspect Ratio Control
Key
VirtualWide VWIDE
Cinema CINEMA
4:3 Image on
16:9 Screen (Display)
4:3 Image on
16:9 Screen
with VirtualWide
4:3 Image on
2.35:1 Screen
with VirtualWide
2.35:1 Image on
16:9 Screen
(Cinema aspect ratio / no CineWide)
2.35:1 Image on
2.35:1 Screen
( Cinema aspect ratio / CineWide)
54
Description
VirtualWide scales a 4:3
image NON-linearly (more
on the sides than in the
center) to fit a 16:9 screen.
On a 2.35:1 screen, the
image is centered between
black bars on either side.
Select Cinema to view 2.35
source material in its native
aspect ratio.
With a 16:9 screen and a
non-CineWide projector (no
anamorphic lens), the upper
and lower portions of the
screen are masked, but the
geometry of the active
image area is unchanged.
With a 2.35:1 screen and a
CineWide-equipped
projector, the video
processor scales the 2.35:1
image so that the active
image area fills the 16:9
chip surface, eliminating the
black bars. The secondary,
anamorphic lens then
restores the proper
geometry to the 2.35:1
image.
Runco RS-900 Owner's Operating Manual