Philips Norelco PT730 User Manual page 20

C
C
C
2
1
C
C
1
2
2 Press the Razor Head Release Button to
open the Razor Head Assembly.
3 Pull the shaving unit off the razor.
4 Turn the lock counterclockwise to unlock
(1) and remove the retaining frame (2).
5 Remove the razor heads and place the
new razor heads in the shaving unit.
Make sure that the two pointy edges of the head
fit exactly into the recesses.
Replace the frame and turn the lock
6
clockwise until it locks into place.
7 Insert the notch of the shaving unit into
the slot in the top of the razor (1) and
then close the shaving unit (2).
NOTE: If the shaving unit does not close smoothly,
make sure you inserted the shaving heads
properly and that the retaining frame is locked.
This razor has no other user-serviceable parts.
For assistance call 1-800-243-3050
ENGLISH
Meijer.com
21